# Model 541 Changelog

NOTE, when updating between versions where any digit but the last has changed:
- New settings have been added
- The update will set reset the unit to Factory Default settings, except for IP settings
- Previous settings will automatically be recalled after Factory Defaults are loaded
- This will take ~30 seconds after the unit has been updated, and it will reboot after
- Any new settings that didn't exist in the previous firmware will be at their respective defaults

How to update firmware:
- Access the Admin webpage
- Click "Select Firmware File..."
- Select the firmware (.bin file)
- Click "Update Firmware"
- Wait for update to complete

## [1.0.2.12] - 2026-11-12

### Fixed
- *Actually* fix issue where the display can become "glitchy" for a while before returning to normal
- Fix the HTTP server login (401 Unauthorized) being blocked by certain networking equipment that filters out
  "malformed" HTTP. The HTTP Response did not have a CRLF after the headers, even though there is no body.

## [1.0.2.11] - 2026-08-24

### Fixed
- Fix issue where the display can become "glitchy" for a while before returning to normal

## [1.0.2.10] - 2026-02-11

### Changed
- Updated manual (downloadable via Admin webpage)

## [1.0.2.8] - 2025-05-15

### Fixed
- Allow Dante gateway and DNS to be set to 0.0.0.0
- This update should address some occurrences of the display becoming "glitchy"

## [1.0.2.7] - 2024-12-17

### Changed
- Internal changes for factory checkout procedure

## [1.0.2.6] - 2024-11-06

### Fixed
- Fixed AES output channel status CRC being incorrect (does not affect audio)
- Consistent audio metering below -40dB (between 541/551/552/526)

## [1.0.2.5] - 2024-07-30

### Fixed
- Some of the stream output related SNMP MIB OIDs were not working
- Fixed the possibility of the firmware upload process failing, requiring a reboot to try again.
  Since this fixes that, it may take several tries to get this firmware to upload successfully.

## [1.0.2.4] - 2024-04-30

### Fixed
- Fixed the web audio stream not working anymore after latest iOS update
- The AES output could have a single sample glitch every so often

## [1.0.2.3] - 2024-04-11

### Fixed
- Modulation units were showing %% instead of % on GUI

## [1.0.2.2] - 2024-02-29

### Fixed
- FSK ID Alarm settings menu was missing from Alarms menu on front panel GUI
- FSK ID email was missing from the Email menu on the front panel GUI
- FSK ID Alarm settings for presets were missing from Hardware Profile
- FSK ID Alarm status was missing from Station Rotation status
- Some FSK ID related OIDs in MIB were missing/incorrect

## [1.0.2.1] - 2024-02-23

### Changed
- Carrier offset measurement shown in kHz instead of Hz

## [1.0.2.0] - 2024-01-09

### Added
- FSK ID alarm
- Carrier offset measurement
- NTP (time) server sync status on Time webpage/menu

### Fixed
- GUI: IF spectrum mask would disappear when switching back and forth between menus
- Alarm Log would mess up if a preset name contained a quote character (")

## [1.0.1.0] - 2023-07-19

### Added
- Option for displaying modulation as kHz or % globally
- Option for showing mask on IF spectrum display (FCC or ITU-R)

### Fixed
- Fix RT+2 text showing 1 character when the tag is 0 (None)

